10.0.1.1 is an IP address with different broadband routers like Belkin and D-link model, Airport Express model, etc. as their gateway default address. You can get access to the administration interface by searching this IP address in the address bar. However, this is not the only IP address for the routers as there are several IPs for routers that are used to access wireless routers, security appliances, bridge control panel, etc. Although, standard IP is also known as Default Gateway Internet Protocol.
Most people don’t know about their router however you have to access and alter the SSID that is Wi-Fi network name, password, or other control settings. Therefore, you will need this IP address to manage data traffic and other routers settings.
What is the 10.0.1.1 Address?
10.0.0.1 is an IP address usually that is assigned to the devices under the local network. Usually, this particular local network is configured to this specific group of IPs. This IP address is reserved for private networks and every home network connected device will get the same address except the last digits for the address.
The home connected devices will use the 10.0.1.1 IP address and your router to get access to the internet. Therefore, your router will combine your home network with a public Internet Protocol Address. Here are some ranges listed below for the private networks:
- 192.168.0.0 – 192.168.255.255
- 172.16.0.0 – 172.31.255.255
- 10.0.0.0 – 10.255.255.255
However, the most commonly used IP address is 192.168.0.0 – 192.168.255.255 and sometimes 172.16.0.0 – 172.31.255.255 and not often 10.0.0.0- 10.255.255.255.
How to Access 10.0.1.1?
Here are the following key points to access the 10.0.1.1 address:
Step 1: Firstly, open any internet browser in your system that you prefer.
Step 2: Further, in the search bar of the browser you have to type the address http://10.0.1.1. Therefore, you will get the gateway login page there.
Step 3: Furthermore, you have to enter the username and password credentials. (Usually for Apple or D-link routers admin is username and nil is the password by default). If you already know the login credentials, then simply write it and hit the Enter button and get the administration interface.
Step 4: Finally, you will get the official portal however ensure while filling the details and settings alternation.
How can I set up my router with 10.0.0.1?
As a management Internet Protocol Address, 10.0.0.1 is used in various routers. Therefore, you can easily access your IP address with your router’s features and options and setup router’s settings such as web proxy, DHCP client, wireless function, MAC address, DNS, etc. Here are the following steps to set up the router:
Step 1: At first, go through all the pages and menus and find the network part. Then, set up your network with dial-up or DSL method.
Step 2: After that, enter username and password credentials provided by the network provider and setup DNS as 8.8.8.8 and 8.8.4.4 and ensure DHCP on. Therefore, you will be allowed to assign the client’s device automatically or blocked from its network.
Step 3: Further, set up a wireless connection by simply turn on or off. To ensure your wireless router’s safety select WPA or WPE simply means to set up a Wi-Fi password on this.
Login problems
- 0.0.1 is not working
If you are not able to access 10.0.0.1 then try the port mapping method and reserve a DHCP provided IP address. You can connect with the wireless connections either time capsule or Airport Extreme using an Ethernet connection. You can perform these operations with the following key points:
- Port mapping setup
Step 1: At first, connect to the Airport utility and select the base station. Then, under edit select Network Tab.
Step 2: Further, under port mapping click the “+” (Add) option.
Step 3: Furthermore, enter the desired description that you were mapping, appropriate UDP port values, TCP port values.
Step 4: After that, by repeating the network tab selection process enter the IP address of the host device. Also, enter the same public UDP and TCP ports of choices.
Step 5: Finally, select the save option to save the changes.
- DHCP provided IP address for the host device
Step 1: Firstly, connect the Airport utility wireless connection and select base station form there. Under edit go for the Network Tab option.
Step 2: Further, you have to verify your router mode that is DHCP and NAT.
Step 3: Furthermore, under the DHCP reservation select the “+” option (Add button) and enter the desired description of the host service.
Step 4: After that, reserve address by MAC address and enter the MAC hardware address of the host computer (For wired Ethernet ID and wireless Airport ID).
Step 5: Now, you have to enter private IP that is LAN side IP that you want to reserve from the DHCP pool of a group of addresses.
Step 6: Finally, click Save to keep settings the same.
If You Forget Your Router Username or Password
Whenever you have forgotten your username or password of router you can use the following possible solutions:
Solution 1:
You can log in to your router using the default username and password credentials if you have not transformed your system settings. However, if you don’t have the details of the default credentials then you can get these details through Router Brands. Then, you will get the model and its respective budget.
Solution 2:
If you have transformed your username and password formerly, you can’t log in with the default credentials. Therefore, you have to reset your router settings just simply by pushing the reset button for a twenty-five seconds time duration through the needle or any toothpick. This process will complete when the unit lights will activate again. When the router is reset then, all options will return as previous and your connection will be disconnected. Also, if you don’t have enough information then, assist from a professional for such purpose.
Conclusion
In this article, we get to know about 10.0.1.1 IP addresses with detailed information. We hope his information will help you to get clear your all doubts related to this IP address operation and performance!
