A Wi-Fi password is necessary for securing the network and prevents other malicious users from taking advantage.
This article will guide you on how to log in to your Belkin Router using the Belkin router login IP address. By logging into the Belkin router, you can limit the number of users.
The following will guide you through every step and help you out in whatever way necessary.
How To Log In To a Belkin Router?
When Belkin Router is installed, the username and password are set by default. If you haven’t changed the password, it will give an opportunity to the hackers to use your network.
Before you log in, ensure your computer or tablet is connected to the router. Follow the below steps.
1. Connect to Your Network
Connect your mobile or computer to the wireless or wired network of the Belkin router. Connecting to the network is essential so that one can access the administration tools in it.
2. Get the Belkin Router to the Default IP Address
Search “default Belkin router IP address” in any browser to get the IP address. 192.168.6.1 is the default IP address for any Belkin Router, it will directly lead you to the login page.
3. Go to Login Page
Go to any web browser and type 192.168.6.1 will direct you to the login page of Belkin Router.
Since the Username and password is set by default, no need for a username to log in for the first time.
However, you can change the username in router settings if Belkin Router Manager is installed.
If you have not set the password yet, leave the password field blank and simply click the “Submit” button.
If it doesn’t work, that means your router password has been changed without your knowledge. Follow the below steps.
Set the Belkin router to factory defaults.Hold the reset button at the rear end of the router unit for 15 seconds until the router reboots itself automatically.
Thus, you have successfully logged in.
How to Change Your Belkin Wi-Fi Password?
Here comes the second step after you successfully log in to your Belkin Router network.
The changing password ensures the network security and the data you use using the network safe. Follow the below steps carefully.
You can change the password in the control panel or when you log in for the first time, the page will directly lead you to change the password section. The new password must be complex.
1. Access Router Web Interface with IP Address
Type 192.168.6.2 in the address bar of your web browser. You will be redirected to the log-in page.
2. Log In To Your Network
Enter the Username and Password on the login web page, however, if you have not yet set the password, leave the password field empty and click on the submit button.
For any queries in logging in to the network, refer to the above guideline “How to Log in to a Belkin Router”.
3. Wi-Fi Settings
In the left navigation bar of the control panel, select “security” where you can change your wi-fi password.
4. New Password
To change the password, follow the below instructions carefully.
For every router, there will be a default PSK (Pre-shared key) using this you can distinguish between different routers. PSK is your wi-fi security or password.
Step 1: Go to the pre-shared key field and enter your preferred password.The password must be 8-15 characters and is case-sensitive.
Step 2: In Security Mode, select 64bit WEP mode.Enter the preferred password in PassPhrase.
Step 3: Click “Apply changes”.Now, you are finally set to go. You can make any adjustments in the Wi-Fi setting adjustments.
How to Reset a Blkin Router or Modem?
If your router has performance issues and any other issues, factory resetting will be helpful. It troubleshoots the router and tries to fix small problems.
Resetting factory adjustments will help router performance to maximum efficiency. However, some issues can not be solved simply by factory settings, follow the below instructions.
You can reset a Belkin Router or Modem using the below two approaches.
Alert: factory resetting will remove your password and username and comebacks to square one.
1. Using the Web bowser
Connect the computer or tablet to the Belkin device before resetting.
Step 1: Open any web browser according to your OS.
Step 2: Search http://192.168.2.1 in the address bar. If your router has a unique IP address, use it.
If you do not know the IP address search for Belking Router default IP address in the search tab.
Step 3: Log in to your Belkin router. If you do not know how to refer to the previous guide “How to Log in to a Belkin Router”.
Step 4: Go to “Restore Factory Defaults” in the “Utilities”
Step 5: Click “Restore defaults”.
Finally, the router is reset successfully.
2. Reset Button
You can reset the router manually too.Locate the Reset button on the device, Mostly it will at the rear side for most of the Belkin Devices
Hold the Reset button at the back of the device for 15 seconds. It will reset the router automatically. It might take a couple of minutes for it to be reset completely.
Conclusion
This article will help you through all the difficulties you are facing regarding with Belkin router.
By following the steps thoroughly, will help you to log in successfully, reset the router or change the password.
For the network to be fast you can always add an extra antenna which will increase your network speed.
Dealing with the Belkin router is easy, you just have to know few steps.
Follow the above instructions carefully. Try to be careful with PSK since it is your default Wi-Fi password.
While changing the password, make sure it is complex. You can also log in without using a web browser if you have installed Belkin Router Manager. It will be quite easy and hassle-free.
After resetting, change your username and password again since the reset option will erase all your Wi-Fi settings.I hope this article is helpful to you.